EVOLVEO 12R1R Rainbow. RGB Fan 120 mm. 6pin. 5V

EVOLVEO 12R1R Rainbow. 5 V

The RGB LED rainbow strip allows you to enjoy all the colours of the rainbow at once. The EVOLVEO 12R1R can only be paired with one of the following devices:

• EVOLVEO A2 cable. compatible with motherboards supporting rainbow RGB technology with RGB 3-pin connectors and a 5 V power supply (GIGABYTE – SW RGB Fusion. MSI – SW Mystic Light Sync. ASUS – SW AURA. ASRock – SW RGB LED. etc.)
• EVOLVEO C1 sequencer. with a remote control allowing you to adjust ventilator speed and switch between colour modes without connecting to the motherboard

CONNECTED USING THE EVOLVEO A2 CABLE

The EVOLVEO 12R1R Rainbow 5 V can be connected together with the Rainbow 5 V EVOLVEO 30S2 strip. The EVOLVEO A2 cable allows you to connect up to 4 RGB rainbow devices and is compatible with motherboards with RGB 5 V 3-pin connectors.

CONNECTED WITH THE EVOLVEO C1 SEQUENCER

The EVOLVEO C1 replaces regular strip control through the motherboard. The C1 sequencer can be connected to as many as 10 EVOLVEO RGB devices with 6-pin connectors. The ventilator can be plugged in together with the EVOLVEO 30S2 strip. The effects can be controlled in three ways:

• with a remote control – ventilator rotation speed. switching between light effects. and light-effect speed
• with the three push-buttons on the sequencer – ventilator rotation speed. switching between light effects. and light-effect speed
• by connecting the sequencer to your PC’s RESET button – switching between light effects

Specifications:

• 18x RGB LED
• 8 colours: blue. light blue. red. green. yellow. white. pink
• 8 effects. each can be stopped at any moment to add a specific backlight. or turn off the LED entirely
• bearing: rifle
• PWM
• rotation speed: max. 1.200 RPM
• air flow: max. 32 CFM
• noise level 15 dB
• dimensions: 120 x 120 x 26 mm